spraychip® Installation
1. carefully screw the spraychip into the split flow interface (SFI).
NOTICE
Do not use a tool and do not overtighten the spraychip.
Tubing
connections
Figure 9
The spraychip® and Split Flow Interface (SFI)
2. Secure the spraychip into the SFI using the grub screw. The assembled SFI will look as
shown in Figure 10.
NOTE
The orientation of the spraychip will vary when fitted.
3. align the assembled split flow interface (SFI) with the threaded opening in the vac‑chip
assembly.
Main
Body
Grub
Screw
Figure 10
Assembled Split Flow Interface (SFI)
Metal
collar
PEEK
Screw
spraychip
VERITY® 1910 MS DETEcToR
21
| USER'S GUIDE