Auto Tune (Calibrate) - Gilson VERITY 1910 MS User Manual

chapter 3

aUtO tUNe (CaLIBrate)

Chapter 3 |
IN thIS Chapter
|
● Locate Required Items 36
|
● Pump Down 36
|
● Prepare the Syringe Pump 37
|
● Plumb the Syringe Pump 38
|
● Run the Auto Tune (calibration) Procedure 39
|
● Flush the System
39
Auto tune (calibrate) prior to first use, if known m/z or resolution values have shifted,
an ion guide or ionchip is replaced, or the VERITY® 1910 MS Detector has been moved
to a new environment. Sodium trifluoroacetate (NaTFA) is used to calibrate the
VERITY 1910 MS Detector. The required solution is 10 mmol in 1:1 2-propanol:water.
VERITY® 1910 MS DETEcToR | USER'S GUIDE 35