Gilson VERITY 1910 MS User Manual page 25

Port Description
A PS/2 Keyboard (not used)
B PS/2 Mouse (not used)
C VGA Monitor (if applicable)
D RS‑232
E eSATA (not used)
F HDMI (not used)
G Ethernet
USB
H H1 B‑Type Connector
H2 A‑Type Connector
Power Connections
pOWer SUppLY
The power supply in the VERITY 1910 MS Detector accepts any line voltage in the
range 100–240V. There is no voltage selector or externally accessible fuses on the
VERITY 1910 MS Detector. Refer to Rear Panel Connections on page 24.
When operating the VERITY 1910 MS Detector it must be possible to disconnect the
instrument from mains supply at any time. In the event of an emergency the power
connector of the instrument must be easily accessible and removable.
When installing or operating the instrument you must ensure that there is sufficient space
CAUTION
behind the instrument to unplug the power cord.
Rear Panel Components
Port
J
K
L
M
N
P
Q
VERITY® 1910 MS DETEcToR
Description
Analog In (not used)
Analog Out (not used)
Microphone In (not used)
Gas
Exhaust
Power
P1 VERITY 1910 MS Detector
P2 MiDas
Auxiliary I/O (not used)
25
| USER'S GUIDE