6. Use a PH1 Phillips screwdriver to loosen (but not remove) the three screws in the main
body of the SFI. When the screws are loose, remove the top cover of the SFI (Figure 38).
Input Line nut
Top cover
Waste Line nut
Figure 38
SFI with Cover Opened
7. After the cover is removed, use the PH1 Phillips screwdriver to remove the screw retaining
the tee (Figure 39).
SFI Base
Figure 39
SFI Splitting Tee and Retaining Screw
68
MAInTEnAncE
Splitting Tee
Low Flow
Tube
|
VERITY® 1910 MS DETEcToR
Securing
Screws
Reducing
Union
SFI Base
Retaining Screw