Gilson VERITY 1910 MS User Manual page 27

reMOte CONtrOL
trILUtION LC
1. locate the Ethernet cable provided with the router.
2. Plug one end of the Ethernet cable into an available Ethernet port on the router and the
other to the Pc.
3. Turn on the Pc.
4. connect the ac power cord to the router, then plug the power cord into a grounded
outlet. If necessary, switch the router on.
5. Ensure that the VERITY 1910 MS Detector is powered off.
6. locate the Ethernet cable provided with the VERITY 1910 MS Detector.
7. connect an Ethernet cable into one of the ports (G) and the other end to the router.
LOCaL CONtrOL
GGp Software
1. locate the Ethernet cable provided with the VERITY 1910 MS Detector.
2. connect an Ethernet cable into one of the ports (G) and the other end to the
Plc Purification System.
Masscape® Software
1. connect the supplied monitor and cable to the VGa monitor port (c).
2. connect the supplied keyboard and mouse to a free USB port (H).
VERITY® 1910 MS DETEcToR
27
| USER'S GUIDE