Safety - Gilson VERITY 1910 MS User Manual

IN thIS Chapter
● Electronic and Hazard Symbols
|
● Safety Notices
7
● chemical Hazards
● compressed Gas Hazards
● Dangerous High Voltages
● High Voltages and Solvents
● Safety Precautions
● Protective covers
|
● Pump Exhaust 8
|
● Spacing 8
Read this chapter before installing and operating the instrument.
only trained technical personnel in a laboratory environment may use the instrument
for non-medical, liquid handling purposes. For safe and correct use of the instrument,
operating and service personnel must follow all instructions contained in this guide
when installing, cleaning, and maintaining the instrument. All safety precautions must be
observed during all phases of operation, service, and repair of the instrument.
Failure to comply with these precautions or with warnings described in the user's guide
violates safety standards of design, manufacture, and intended use of the instrument.
Gilson assumes no liability for customers failing to comply with these requirements.
The instrument has been certified to safety standards required in canada, Europe, and
the United States. Refer to the rear panel label on the instrument and the Declaration of
conformity document for the current standards to which the instrument has been found
compliant.

SaFetY

Chapter 1 |
|
6
|
7
|
7
|
7
|
7
|
8
|
8
VERITY® 1910 MS DETEcToR | USER'S GUIDE 5