Inserting Pauses In Fax Numbers; Select Fax To , And Then Press The Ok Button - Xerox Phaser 8510 User Manual

Inserting Pauses in Fax Numbers

Some fax numbers require one or more pauses during the dialing sequence.
To insert pauses in a fax number:
1. On the control panel, press the Fax button.
2. Select , and then press the OK button.
Fax To
3. When entering a fax number using the alphanumeric keypad, press the Pause button to
insert a pause (represented by a comma) in the fax number where appropriate.
4. Press the Start button to send the fax.
Changing the Pause Setting
To change the pause setting:
1. On the control panel, press the System button.
2. Select
Troubleshooting
3. Select
Fax Problems
4. Select , and then press the OK button.
Dial Delay
5. Follow the onscreen prompts to select a new time setting for pause entries, and then press
the OK button.
Note: The factory default is three seconds.
Phaser® 8560MFP/8860MFP Multifunction Printer
, and then press the OK button.
, and then press the OK button.
6-23
Managing Fax Functions