Preparing The Printer For Shipment - Xerox Phaser 8510 User Manual

Preparing the Printer for Shipment

Before shipping the system:
1. Remove the maintenance kit and waste tray. See
Waste Tray on page 8-28.
2. Turn off the system. See
3.
Remove the document feeder and scanner. See
Scanner on page 8-32.
4.
Pack the system. See
Repack the system using the original packing material and boxes or a Xerox repackaging kit.
Additional instructions for repacking the system are provided in the repackaging kit. If you do
not have all the original packaging, or are unable to repackage the system, contact your local
Xerox service representative.
Caution: Damage to the system resulting from improper moving or failure to repackage the
system properly for shipment, is not covered by the warranty, service agreement, or Total
Satisfaction Guarantee. The Total Satisfaction Guarantee is available in the United States and
Canada. Coverage may vary outside these areas; please contact your local representative for
details.
Phaser® 8560MFP/8860MFP Multifunction Printer
Turning Off the Printer
Packing the Printer on page 8-34.
8-27
Moving and Repacking the Printer
Removing the Maintenance Kit and
on page 8-30.
Removing the Document Feeder and