Setting the Original Size
To specify the size of the original:
1.
On the control panel, press the Scan button.
2.
Select
, and then press the OK button.
Original Size
3.
Select one of the following options, and then press the OK button:
■
Automatic
■
Document Glass: Each original is prescanned to determine the size for each page
in the scan job. Each scanned image is placed in a separate file.
Document Feeder: Each original is scanned at 8.5 inches wide by the length of
■
paper that feeds through the document feeder to determine the size for each page
in the scan job. Each scanned image is placed in a separate file.
■
Automatic (1st Page)
■
Document Glass: The first original is prescanned to determine the size for all
pages in the scan job. All scanned images are placed in one file.
■
Document Feeder: The first original is scanned at 8.5 inches wide by the length
of paper that feeds through the document feeder to determine the size for all pages
in the scan job. All scanned images are placed in one file.
■
<paper sizes>
: Select a specific paper size to determine the area to be scanned. All
scanned images are placed in one file.
Note:
The factory default is
Phaser® 8560MFP/8860MFP Multifunction Printer
.
Automatic (1st Page)
5-19
Scanning Options