Xerox Phaser 8510 User Manual page 102

Specifying 2-Sided Originals or Copies
When you use the document feeder with 2-sided originals, one or both sides can be scanned
for copying. You can also create 1-sided or 2-sided copies.
Press the 2-Sided button on the control panel to select one of the following options:
■ : Scans only one side of the originals and produces 1-sided copies.
1 to 1
■ : Scans only one side of the originals and produces 2-sided copies.
1 to 2
: Scans both sides of the originals and produces 2-sided copies.
■ 2 to 2
■ : Scans both sides of the originals and produces 1-sided copies.
2 to 1
Note: The factory default is 1 to 1.
Copies do not begin printing until the system has scanned all the originals for the first page.
When making two sided copies (1 to 2 or 2 to 2), printing does not begin until enough pages
have been scanned for two sides.
Note: The and
1 to 2 2 to 2
Phaser® 8560MFP/8860MFP Multifunction Printer
Output 2 Sided Lighten
Document
Color
Darken
Quality
Type
Mode
options are not available on systems without the document feeder.
4-5
Adjusting Copying Options
Reduce
Enlarge
8860mfp-047