Xerox Phaser 8510 User Manual page 193

3. Locate the ink-loading bin that is low. A label above each bin indicates the ink stick color
and shape for that bin.
4. Remove the ink stick from its packaging, and then insert the ink stick into the opening of
the appropriate ink-loading bin. Do not force the ink stick into the ink-loading bin. Each
ink stick is uniquely shaped to fit into the correct ink-loading bin.
5. Close the ink cover.
6. Close the control panel.
ready for printing.
Note:
To minimize ink waste and optimize performance, leave the system on at all times.
To order ink, contact your local reseller or go to the Xerox Supplies website for your printer:
■ www.xerox.com/office/8560MFPsupplies
■ www.xerox.com/office/8860MFPsupplies
Caution:
Use of ink other than Genuine Xerox Phaser 8560MFP/8860MFP Solid Ink may
affect print quality and system reliability. It is the only ink designed and manufactured under
strict quality controls by Xerox for specific use with this system.
Phaser® 8560MFP/8860MFP Multifunction Printer
1
2
3
is displayed on the control panel until the system is
Warming Up
(Phaser 8560MFP printer)
(Phaser 8860MFP printer)
8-4
Maintenance and Cleaning
4
8860mfp-107