Xerox Phaser 8510 User Manual page 89

3. Insert glossy paper in the tray. Adjust the paper guides to fit the paper.
4.
On the control panel, press the OK button if the correct paper size and type are displayed
as the current setup, or select the appropriate paper size and type:
a.
Select Change setup
b. Select the appropriate paper size, and then press the OK button.
c. Select the appropriate paper type, and then press the OK button:
■ Card Stock
■
Glossy Paper
5. In the printer driver, select the appropriate paper type or Tray 1 as the paper source.
Phaser® 8560MFP/8860MFP Multifunction Printer
, and then press the OK button.
(Phaser 8560MFP printer)
(Phaser 8860MFP printer)
3-51
Printing on Specialty Media
8860mfp-009