Xerox Phaser 8510 User Manual page 267

Europe
Radio Equipment & Telecommunications Terminal Equipment Directive
This Xerox product has been self-certified by Xerox for pan-European single terminal
connection to the analogue public switched telephone network (PSTN) in accordance with
Directive 1999/5/EC. The product has been designed to work with the national PSTNs and
compatible PBXs of the following countries:
Austria Germany
Belgium Greece
Denmark Iceland
France Ireland
Italy Spain
In the event of a problem you should contact your authorized local dealer in the first instance.
This product has been tested to and is compliant with TBR21, a specification for terminal
equipment for use on analogue-switched telephone networks in the European Economic Area.
This product provides an user-adjustable setting of the country code. Refer to the customer
documentation for this procedure. Country codes should be set prior to connecting this product
to the network.
Note:
Although this product can use either loop disconnect (pulse) or DTMF (tone) signaling,
it is recommended that it is set to use DTMF signaling. DTMF signaling provides reliable and
faster call setup. Modification of this product, connection to external control software or to
external control apparatus not authorized by Xerox, will invalidate its certification.
South African Statement
This modem must be used in conjunction with an approved surge protection device.
Phaser® 8560MFP/8860MFP Multifunction Printer
Luxembourg
Netherlands
Norway
Portugal
C-4
Sweden
Switzerland
United Kingdom
Finland