Transparency Images Are Too Light or Too Dark
Problem
Text or graphics printed on transparencies are either too light or too dark.
Solution
To prevent transparency text or graphics from being too light or too dark:
1.
Verify that Transparency is select in the software application or in the printer driver.
2.
Verify that the tray containing the transparencies is set to print transparencies:
a.
On the control panel, press the System button.
b.
Select
Paper Tray Setup
c.
Select
Tray 1 Paper
OK button.
d.
Select
Transparency
3.
Print the Paper Tips page for more information about transparencies:
a.
On the control panel, press the System button.
b.
Select
Information
c.
Select
Information Pages
d.
Select
Paper Tips Page
Note:
Use only recommended Xerox transparencies.
See also:
For the Phaser 8560MFP:
Recommended Media List (United States)
Recommended Media List (Europe)
For the Phaser 8860MFP:
Recommended Media List (United States)
Recommended Media List (Europe)
Phaser® 8560MFP/8860MFP Multifunction Printer
, and then press the OK button.
,
,
Tray 2 Paper
Tray 3 Paper
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
7-11
Solving Print-Quality Problems
, or
, and then press the
Tray 4 Paper