Xerox Phaser 8510 User Manual page 101

Setting the Copy Default Tray
To set the default paper supply tray for copy jobs:
1. On the control panel, press the System button.
2.
Select
Job Defaults Setup
3. Select
Copy Defaults Setup
4. Select
Paper Supply
5.
Select the desired tray, and then press the OK button to save the changes.
Selecting Color or Black and White Copies
If the original document has color, you can create copies in color or in black and white. Press
the Color Mode button on the control panel to change the selection to color, black and white,
or Auto.
If you select the color option and the system prompts you for a password, enter the password
using the numeric keypad, and then press the OK button.
Note: An administrator can limit the use of the color copy function by setting a password. For
more information, see Using a Color Copy Password
Phaser® 8560MFP/8860MFP Multifunction Printer
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
Output 2 Sided
Document
Color
Quality
Type
Mode
4-4
Adjusting Copying Options
Reduce
Lighten
Darken Enlarge
8860mfp-046
on page 4-20.