Xerox Phaser 8510 User Manual page 83

3. Insert labels into the tray with the side to be printed facedown and the top of the page
entering the system first.
4. Adjust the paper guides to fit the labels loaded in the tray.
5.
On the control panel, press the OK button if the correct paper size and
displayed as the current setup, or select the label size and type:
a.
Select Change setup
b.
Select the appropriate paper size, and then press the OK button.
c. Select , and then press the OK button.
Labels
6. In the printer driver, select either Labels as the paper type or Tray 1 as the paper source.
Phaser® 8560MFP/8860MFP Multifunction Printer
, and then press the OK button.
3-45
Printing on Specialty Media
8860mfp-036
8860mfp-037
Labels are