Xerox Phaser 8510 User Manual page 85

3.
Adjust the paper guides to fit the labels (if necessary).
■ Length guide: Press the sides, and then slide the guide until the arrow on the guide
points to the appropriate paper size imprinted on the bottom of the tray. When
properly positioned, the guide clicks into place.
■ Width guides: Slide the width guides until the arrows on the guides point to the
appropriate paper size labeled on the bottom of the tray. When properly positioned,
the guides click into place.
Note:
When the paper guides are adjusted correctly, there may be a small space between
the labels and the guides.
Phaser® 8560MFP/8860MFP Multifunction Printer
Printing on Specialty Media
8860mfp-039
8860mfp-040
3-47