Xerox Phaser 8510 User Manual page 19

Left Side of the Control Panel
The left side of the control panel contains the
following copy, scan, and fax function buttons and
LEDs. A lighted LED indicates the current
selection.
1. Color Mode button and LEDs
Press the Color Mode button to select black
and white or color for your copy or scan job.
2. Document Type button and LEDs
Press the Document Type button to select the
type of document for your copy or scan job:
photo, graphic, mixed (text and graphics), text
only.
3. Output Quality button and LEDs (copy only)
Press the Output Quality button to select the
output quality mode for the copy job: fast color,
standard, enhanced, and
high-resolution/photo.
See also:
Copying on page 4-1
Scanning on page 5-1
Faxing on page 6-1
Phaser® 8560MFP/8860MFP Multifunction Printer
Output 2 Sided
Document
Color
Quality
Type
Mode
1 2 3 4
4.
5.
6.
7.
8.
9.
1-11
Reduce
Lighten
Darken Enlarge
9
8
7
5 6
8860mfp-007
2-Sided button and LEDs
Press the 2-Sided button to select either one-
or 2-sided for the original and one- or 2-sided
for the output.
Lighten/Darken button and LEDs
Press the Lighten/Darken button to select a
setting for your copy, scan, or fax job.
Reduce/Enlarge button and LEDs
Press the Reduce/Enlarge button to select
reduce/enlarge percentage options for your
output: 25, 50, 100, 150, 200, 400.
Reduce/Enlarge Down Arrow button
Press the Down Arrow button to reduce the
percentage in one percent increments.
Reduce/Enlarge Up Arrow button
Press the Up Arrow button to increase the
percentage in one percent increments.
Reduce/Enlarge Percentage LED
The LED displays the percentage selected.
Control Panel