Xerox Phaser 8510 User Manual page 86

4. Insert the tray into the tray slot, and then push it completely into the system.
5.
On the control panel, press the System button.
a.
Select Paper Tray Setup
b. Select
Tray 2 Paper
c. Select
Use current setup
the paper type:
Select
■ Tray 2 Paper Type
press the OK button.
■ Select Labels
6.
In the printer driver, select either Labels as the paper type or the appropriate tray as the
paper source.
Phaser® 8560MFP/8860MFP Multifunction Printer
, and then press the OK button.
, , or
Tray 3 Paper Tray 4 Paper
if is displayed as the current paper type, or change
Labels
,
Tray 3 Paper Type
from the list displayed, and then press the OK button.
3-48
Printing on Specialty Media
8860mfp-041
, and then press the OK button.
, or , and then
Tray 4 Paper Type