Time Server Address; Auto Clear - Xerox 4112 System Administration Manual

Setups

Time Server Address

This is used to enter the IP address for the time server.
Note
Set the NTP Time Synchronization to on.
1. From the Machine Clock/Timers screen, select Time Server Address and press Change
Settings.
2. Enter the IP address:
IP Address: Set the IP address of the time server from which the time is obtained,
•
using values 0 to 255.
Note
Addresses 244 to 255.XXX.XXX.XXX and 127.XXX.XXX.XXX cannot be set.
Note
Select Next to enter the next part of the IP address if the address between dots is less than
3 digits.
3. Select Save to save the settings and return to the previous window.

Auto clear

If a given time period elapses with no operation, the machine automatically returns to the
initial screen.
Set a period from 1 to 4 minutes, in intervals of 1 minute. To cancel the setting, select the
Cancel button to delete any selections made on this screen.
Note
If Off is selected, any currently pending jobs continue processing after one minute of
inactivity on the machine.
3-8
Xerox 4112/4127 EPS
System Administration Guide