Job Complete; Out Of Paper; Auto Clear - Xerox WorkCentre 5022 User Manual

Tools
You can select Soft, Normal, or Loud. Select Off to disable this tone.
Normal is set at the time of factory shipment.

Job Complete

Sets the volume of the tone that sounds to indicate a job has completed normally.
You can select Soft, Normal, or Loud. Select Off to disable this tone.
Normal is set at the time of factory shipment.
Fault
Sets the volume of the tone that sounds to indicate a job has failed.
You can select Soft, Normal, or Loud. Select Off to disable this tone.
Normal is set at the time of factory shipment.
Alert Tone
Sets the volume of the tone that sounds to indicate a job has failed and been put on hold due to a
problem such as a document/paper jam.
You can select Soft, Normal, or Loud. Select Off to disable this tone.
Normal is set at the time of factory shipment.

Out of Paper

Sets the volume of the tone that sounds to indicate a job has failed and been put on hold because the
paper tray has run out of paper.
You can select Soft, Normal, or Loud. Select Off to disable this tone.
Normal is set at the time of factory shipment.
Consumables
Sets the volume of the tone that sounds to indicate the toner cartridge needs to be replaced.
You can select Soft, Normal, or Loud. Select Off to disable this tone.
Normal is set at the time of factory shipment.

Auto Clear

Sets the volume of the tone that sounds 5 seconds before the display will automatically return to the
Default Display screen when Auto Reset has been set.
® ® 9-47
Xerox WorkCentre 5022/5024 Multifunction Printer
User Guide