Table 1-49 Supported Service Codes - NEC SL2100 Features And Specifications Manual

Hide thumbs Also See for SL2100:

Programming manual (678 pages)

Hardware manual (218 pages)

Networking manual (196 pages)

page of 978

/ 978
Contents
Table of Contents
Bookmarks

Table of Contents

Alternatively, if calling line identification routing is enabled, the relevant Speed Dial bin could be

transferred to the Mobile Extension proxy port which would then provide internal dial tone.

Maximum 128 Mobile extensions can be assigned in a system. Initially, 4 user licenses are included, to

increase the number of users SL2100 MOBILE EXT-01 LIC is required.

The features available from a Mobile Extension are listed below. As the Mobile Extension is based on

an SLT port, the service codes used are as per an SLT port. Any feature not listed should be assumed

to be not supported:

• Incoming Ring Group member

• Department Group member

• Toll Restriction

• Class of Service

Though DSS keys are available for the Mobile Extension, they cannot provide an exact indication of

busy status if, for example, the Mobile Extension is active on a call not linked to the SL2100.

The following service codes are supported:

Type Incoming Feature

Night Mode Switching

Night Mode Switching for Other Group

Call Forward - All

Call Forward - Busy

Call Forward - No Answer

Call Forward - Busy/No Answer

Call Forward - Both Ring

Call Forward - Follow-Me

Do Not Disturb

Answer Message Waiting

Cancel All Messages Waiting

Automatic Transfer Setup for Each Extension

Automatic Transfer Cancellation for Each Ex-

tension Group

Delayed Transfer for Every Extension Group

Delayed Transfer Cancellation for Each Exten-

DND Setup for Each Extension Group

DND Cancellation for Each Extension Group

Pilot Group Withdrawing

One Touch Dial Entry

Call Forward/Do Not Disturb Override

Features and Specifications Manual