Station Relocation - NEC SL2100 Features And Specifications Manual

ISSUE 1.0
Description
Station Relocation allows a station to be moved from one location to another, without having to
reprogram the station data. The station features and extension number are the same after it is moved
to the new location.
Conditions
• This feature can be used to swap or relocate multiline and Single Line Terminals.
• The destination extension must be idle. If the station is not idle, busy tone is heard.
• If the Extension Swap service code is dialed from an extension that does not have an extension
swap password programmed, busy tone is heard.
• If the Extension Swap service code is dialed from an extension whose Class of Service does not
allow Extension Data Swap, busy tone is heard.
• If the destination extension entered is not a valid extension, busy tone is heard.
• The following user setting data is relocated with the extension. All other user setting data is either
not relocated or cleared.
- DND
- Call Forwarding
- Memo Dial
- Last Number Dial History
- Saved Number Dial
- Incoming History
- Mute LED Status
- VM MW LED Status
Refer to the Programming section in this feature for system programs that are swapped.
Default Settings
None
System Availability
Terminals
All Multiline Terminals and Single Line Terminals
Required Component(s)
None
Related Features
None
Features and Specifications Manual

Station Relocation

SL2100
S
1-807