NEC SL2100 Features And Specifications Manual page 77

ISSUE 1.0
The system can have only one ACD System Supervisor.
Once assigned as an ACD System Supervisor, the user can:
• Take all system ACD Groups out of service simultaneously (outside callers will hear ringback or the
ACI recording).
• Check the log out status of each agent after the groups are taken down.
• Restore all ACD Groups to service simultaneously.
• Log an agent into or out of an ACD Group.
• Reassign an agent to a different ACD Group.
Work Time
Work Time temporarily busies-out an ACD agent's telephone so they can work at their desk
uninterrupted. This gives the agent time to fill out important logs and records as soon as they are
finished with their call. There are two types of Work Time:
Manual Work Time:
An ACD Agent can enable Manual Work Time anytime they need to work at their desk undisturbed.
You might prefer this Work Time mode if an agent only occasionally has to fill out follow-up paper work
after they complete their call. When the agent is through catching up with their work, they manually
return themselves to the ACD Group.
Automatic Work Time:
The system implements Automatic Work Time for the agent as soon as they hang up their current
ACD call. This is helpful in applications (such as Tech Service groups) where follow-up paperwork is a
requirement for every call. When the agent is done with their work, they manually return themselves to
the ACD Group or can be programmed to automatically return to the ACD Group.
Hotline Key Shows Agent Status
An extension Hotline key provides the normal Busy Lamp Field (BLF) for co-workers and a unique
BLF for ACD Agents. Like the DSS Console BLF, the unique BLF shows when the covered agent is in
service, out of service or busy on a call. This enhanced BLF gives a department manager, for
example, ACD Group monitoring abilities without having to become a supervisor with a DSS Console.
Hotline gives a multiline terminal user one-button calling and Transfer to another extension (the
Hotline partner). Hotline helps co-workers that work closely together. The Hotline partners can call or
Transfer calls to each other just by pressing a single key. Enhanced for ACD applications, Hotline
provides a unique Busy Lamp Field for ACD agents as well as a BLF for co-workers that are not ACD
agents. The charts below show both sets of BLF indications.
When the key is ...
Off
On
Double Wink Off
Wink Off
Double Wink On
When the key is ...
Off Idle
On Busy or ringing
Features and Specifications Manual
BLF For ACD Agents
BLF For Co-Workers That Are Not ACD Agents
The ACD Agent is ...
Idle and is not an ACD Agent
Busy
Making an Emergency Call
Logged off or not installed
Logged on
The ACD Agent is ...
Off Idle
On Busy or ringing
SL2100
A
1-63