Figure 6-12 Service Codes Screen; Figure 6-13 Key Assignment Screen - NEC SL2100 Programming Manual

Issue 1.0
12.

Figure 6-12 Service Codes Screen

13.

Figure 6-13 Key Assignment Screen

6-8
Select an option to change the default Service Codes or to keep the default
values.
For most installations the Service Codes will remain default.
NOTE
Why should the Service Codes be changed?
One example is if the local Area Code matches a Service Code, such as 718
(Night Mode Switching), then to prevent the users from accidentally dialing the
Service Code it can be changed to
Select the Key Assignment for use with trunks. "Line" keys are typically used for
Analog (C.O.) trunks or if there are fewer than 12 SIP trunks. "Loop" & "Park"
keys are typically used for ISDN trunks and if there are more than 12 SIP
trunks.
718.
