NEC SL2100 Features And Specifications Manual page 221

ISSUE 1.0
Default Settings
Enabled
System Availability
Terminals
Standard SIP Phone
Multiline and Single Line Terminals
Required Component(s)
None
Related Features
None
Guide to Feature Programming
Program Program Name
No.
11-12-08 Service Code Setup (for Service Access) -
Barge-In
11-12-47 Service Code Setup (for Service Access) - SLT
Call Waiting Answer/Split Answer
11-12-57 Service Code Setup (for Service Access) - Unsu-
pervised Conference/Tandem Trunking
11-12-58 Service Code Setup (for Service Access) - Trans-
fer Into Conference
11-16-02 1-digit Service Code Setup - Barge-In
14-01-04 Basic Trunk Data Setup - Transmit Gain Level for
Conference and Transfer Calls
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
20-11-21 Class of Service Options (Hold/Transfer Service)
- Restriction for Tandem Trunking on Hang Up
20-13-08 Class of Service Options (Supplementary Serv-
ice) - Conference
20-13-10 Class of Service Options (Supplementary Serv-
ice) - Barge-In Monitor
Features and Specifications Manual
Input Data
0~9, * , # Maximum of 8 digit
0~9, , # Maximum of 8 digit
*
0~9, , # Maximum of 8 digit
*
0~9, , # Maximum of 8 digit
*
0~9, , # Maximum of 1 digit
*
1 ~ 63
(- 15.5 dB ~ + 15.5 dB in 0.5 dB
intervals)
-
1 ~ 15
0 = Allow
1 = Deny
0 = Off
1 = On
0 = Speech
1 = Monitor
SL2100
Default
710
794
#8
624
No Setting
32 (0 dB)
Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
Extension 101 is Class
15 and other Extension
are Class 1
COS 01 ~ 15 = 0
COS 01 ~ 15 = 1
COS 01 ~ 15 = 0
1-207
C