NEC SL2100 Features And Specifications Manual page 845

ISSUE 1.0
Program Program Name
No.
15-02-12 Multiline Telephone Basic Data Setup - Off-Hook
Ringing
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
20-09-01 Class of Service Options (Incoming Call Service)
- Second Call for DID/DISA/DIL/E&M Override
20-09-07 Class of Service Options (Incoming Call Service)
- Call Queuing
20-13-05 Class of Service Options (Supplementary Serv-
ice) - Intercom Off-Hook Signaling
20-13-06 Class of Service Options (Supplementary Serv-
ice) - Automatic Off-Hook Signaling (Automatic
Override)
20-13-34 Class of Service Options (Supplementary Serv-
ice) - Block Manual Off-Hook Signaling
20-13-35 Class of Service Options (Supplementary Serv-
ice) - Block Camp On
20-18-06 Service Tone Timers - Interval of Call Waiting
Tone
80-01-01 Service Tone Setup - Tone Override Tone 15
80-01-02 Service Tone Setup - Ring Busy Tone Tone 39
Operation
To send Off-Hook signals to an extension busy on a call:
Your extension may send Off-Hook signals automatically.
1. Dial 709 (PRG 11-12-02).
- OR -
Press the Off-Hook Signaling key (PRG 15-07-01 code 33).
You hear Ring Busy Tone.
The called extension hears Call Alert Notification.
To answer Tone Override:
1. Receive Tone Override.
Features and Specifications Manual
Input Data
0 = Muted Off-Hook Ringing
1 = No Off-Hook Ringing
3 = Beep in Speaker (SP)
4 = Beep in Handset (HS)
5 = Speaker and Handset Beep
-
1 ~ 15
0 = Off (2nd call will not be al-
lowed.)
1 = On (2nd call is allowed.)
0 = Off (Calls are not queued.)
1 = On (Calls are queued.)
0 = Off (ICM off hook signaling
disabled.)
1 = On (ICM off hook signaling
enabled.)
0 = Off (manually)
1 = On (automatically)
0 = Off
1 = On
0 = Off ( Camp On blocked.)
1 = On (Camp On allowed.)
1 ~ 64800 seconds
0~255 (0~Endless)
0~33 (0=No Tone, 33=Default
Time Slot)
SL2100
Default
5
Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
Extension 101 is Class
15 and other Extension
are Class 1
COS 01 ~ 15 = 1
COS 01 ~ 15 = 0
COS 01 ~ 15 = 1
COS 01 ~ 15 = 1
COS 01 ~ 15 = 0
COS 01 ~ 15 = 0
10
Refer to Programming
Manual.
Refer to Programming
Manual.
1-831
T