NEC SL2100 Features And Specifications Manual page 855

ISSUE 1.0
3. Announce the call and press the Transfer key (PRG 15-07 or SC 751: 06) or hang up.
If you do not have Automatic On-Hook Transfer, you must press your Transfer Programmable
Function Key to Transfer the call.
If your co-worker does not want the call, press the flashing line key to return to the call.
Single Line Terminal users can retrieve the call by pressing hookflash. If a call has been transferred
and the SLT user has hung up the handset, the call can be retrieved by dialing
number to which it had been transferred.
If you do not want to screen the call, hang up without making an announcement.
To answer a call transferred to your extention:
1. Lift the handset or press Speaker key when a co-worker announces the call.
Transferring without Holding
To Transfer without holding (Multiline Terminal only):
1. Lift the handset or press Speaker key.
2. When original caller hangs up, you are connected.
Transferring Intercom Calls
To Transfer your Intercom call:
1. At the Multiline Terminal, press Hold key.
- OR -
At Single Line Terminal, hookflash.
2. Dial extension to receive your call.
If the extension is busy, does not answer or does not want the call, you can dial another extension
number or press the lit line key to return to the call. In addition, you may be able to hang up and have
the call Camp-On.
Single Line Terminal users can retrieve the call by pressing hookflash. If a call has been transferred
and the SLT user has hung up the handset, the call can be retrieved by dialing
number to which it transferred.
3. Announce your call and press the Transfer key (PRG 15-07 or SC 751: 06) or hang up.
With Automatic On-Hook Transfer
When you hang up, the call is automatically transferred.
Without Automatic On-Hook Transfer
You must press your Transfer Programmable Function key to Transfer the call.
To Transfer the call unscreened, press your Transfer Programmable Function key and hang up
without making an announcement.
Transferring a Call into a Conference/Existing Call
1. While on a call, press the Transfer key and dial service code defined in PRG 11-12-58.
The display shows Transfer to Conf. ICM Dial.
Features and Specifications Manual
SL2100
and the extension
**
** and the extension
1-841
T