NEC SL2100 Features And Specifications Manual page 155

ISSUE 1.0
Guide to Feature Programming
The programs listed below indicate the most commonly used programs required for this feature. The
programs are listed in the order that the installer should follow. Refer to the PCPro wizards for further
detailed programming.
• When a * is listed next to the Program Number it indicates a program that MUST be set (from a
default state) for this feature to be enabled.
Call Waiting
Program Program Name
No.
15-02-12 Multiline Telephone Basic Data Setup - Off-Hook
Signaling
20-09-01 Class of Service Options (Incoming Call Service)
- Second Call for DID/DISA/DIL/E&M Override
20-09-07 Class of Service Options (Incoming Call Service)
- Call Queuing
20-13-05 Class of Service Options (Supplementary Serv-
ice) - Intercom Off-Hook Signaling
20-13-06 Class of Service Options (Supplementary Serv-
ice) - Automatic Off-Hook Signaling (Automatic
Override)
20-18-06 Service Tone Timers - Interval of Call Waiting
Tone
Below is a chart that shows setting data for certain call waiting scenarios.
Internal Call to Station on Inter-
nal Call
Station on Trunk
call
DID Call to Station on Inter-
nal Call
Station on Trunk
Call
Features and Specifications Manual
0 = Muted Off-Hook Ringing
1 = No Off-Hook Ringing
3 = Beep in Speaker (SP)
4 = Beep in Handset (HS)
5 = Speaker and Handset Beep
0 = Off (2nd call will not be al-
lowed.)
1 = On (2nd call is allowed.)
0 = Off (Calls are not queued.)
1 = On (Calls are queued.)
0 = Off (ICM off hook signaling
disabled.)
1 = On (ICM off hook signaling
enabled.)
0 = Off (manually)
1 = On (automatically)
1 ~ 64800 seconds
Busy Signal: Ring Back Signal:
No call forwarding Caller queues at called
20-09-07 = Off
20-13-06 = On
20-13-06 = Off
24-09-05 = Off
20-09-07 = Off
20-13-06 = On
20-13-06 = Off
24-09-05 = Of
20-09-01 = Off
20-09-07 = Off
24-09-04 = Off
20-09-01 = Off
20-09-07 = Off
24-09-04 = Off
Input Data
COS 01 ~ 15 = 1
COS 01 ~ 15 = 0
COS 01 ~ 15 = 1
COS 01 ~ 15 = 1
Busy forwarding imme-
diately upon Busy
Station
20-09-07 = Off
*1
20-13-06 = Off
24-09-05 = On
20-09-07 = Off
*1
20-13-06 = Off
24-09-05 = On
20-09-01 = On 20-09-01 = Off
20-09-07 = On 20-09-07 = Off
24-09-04 = On
20-09-01 = On 20-09-01 = Off
20-09-07 = On 20-09-07 = Off
24-09-04 = On
SL2100
Default
C
5
10
1-141