Drop Key - NEC SL2100 Features And Specifications Manual

SL2100
Description
The Drop Key abandons a call while retaining the PBX/Centrex line to originate another call. The Drop
key is provided by programming a Programmable Function key. This feature allows Flash key to be
used to provide a hookflash to the PBX or Central Office. A Single Line Terminal user can use the
Drop key function by an access code.
Conditions
D
• The Drop key provides a timed disconnect signal on CO/PBX lines.
• The Drop key cannot be used for internal, DID calls.
Default Settings
None
System Availability
Terminals
All Stations
Required Component(s)
None
Related Features
Flash
PBX Compatibility/Behind PBX
Guide to Feature Programming
Program
No.
11-12-42 Service Code Setup (for Service Access) - Flash
on Trunk lines
11-12-59 Service Code Setup (for Service Access) - Trunk
Drop Operation for SLT
14-02-03 Analog Trunk Data Setup - Flash Type
14-02-04 Analog Trunk Data Setup - Hooking Type
1-296
Program Name

Drop Key

Input Data
0~9, , # Maximum of 8 digit
*
0~9, , # Maximum of 8 digit
*
0 = Open Loop Flash
1 = Ground
0 = Timed Flash (Hooking)
1 = Disconnect (Cut)
ISSUE 1.0
Default
#3
660
0
0
Drop Key