Room Monitor - NEC SL2100 Features And Specifications Manual

ISSUE 1.0
Description
Room Monitor lets an extension user listen to the sounds in a co-workers area. For example, the
receptionist could listen for sounds in the warehouse when it is left unattended. To use Room Monitor,
the initiating extension and the receiving extension must activate it.
When using Multiline Terminals for monitoring, an extension user can Monitor only one extension at a
time. However, many extensions can Monitor the same extension at the same time. However, only one
Single Line Terminal can monitor another Single Line Terminal at a time.
Room Monitor for Single Line Terminals
This option enables you to monitor the room status through your Single Line Terminals. Between
Multiline Terminals, the monitored room status is picked up by the telephone microphone and the
activity is heard through the speaker of the monitoring Multiline Terminal. Between Single Line
Terminals, at the station to be monitored, a user goes off-hook and dials a service code and the
extension number of the monitoring telephone. At the monitoring station, a user goes off-hook and
dials a service code and the extension number of the monitored telephone. The activity of the area
where the monitored telephone is placed can then be heard at the monitoring telephone. This service
is available until the handset of the monitored telephone is placed on-hook.
Room Monitor by intercom call (DSX Base)
• Room Monitor can simply start by calling Room Monitored set terminal. During Room monitoring by
pressing Talk softkey at monitoring terminal both way talk is available. Adding both way talk,
monitored terminal can make conference call by Talk softkey if multiple terminals are monitoring.
To provide this feature, following PRG need to be set On.
PRG 20-13-55: Intercom call to room monitor (COS of Room Monitored)
PRG 20-13-11: Room Monitoring
PRG 20-13-12: Room Monitored
• Setup for Room Monitored terminal is simply pressing DND key plus Mon softkey or pressing DND
key plus dialing 5.
• Room Monitored terminal can display the Monitoring extension number on it's LCD.
• Only Multiline Terminal can be set as Monitored terminal. IP Multiline Terminal or SLT are not
supported.
• When Monitored terminal canceled the monitored condition by pressing DND key plus dialing 0 or
pressing the Function key, Monitoring terminal setting also cleared automatically.
WARNING: The use of monitoring, recording, or listening devices to
eavesdrop, monitor, retrieve, or record telephone conversation or other sound
activities, whether or not contemporaneous with transmission, may be illegal in
certain circumstances under each country law. Legal advice should be sought
prior to implementing any practice that monitors or records any telephone
conversation. Some countries may require some form of notification to all
parties to a telephone conversation, such as using a beep tone or other
notification methods or requiring the consent of all parties to the telephone
conversation, prior to monitoring or recording the telephone conversation.
Some of these laws incorporate strict penalties.
Features and Specifications Manual
SL2100

Room Monitor

R
1-735