NEC SL2100 Features And Specifications Manual page 303

ISSUE 1.0
Program Program Name
No.
20-09-13 Class of Service Options (Incoming Call Service)
- DND Active While Ringing
20-13-04 Class of Service Options (Supplementary Serv-
ice) - Call Forward/DND Override (Bypass Call)
20-13-40 Class of Service Options (Supplementary Serv-
ice) - Do Not Disturb
Operation
To activate or deactivate Do Not Disturb while your extension is idle:
Multiline Terminal Using Softkeys (When set PRG 15-02-60: 0)
(This feature is available for 2W Digital/IP Multiline Terminal Only.)
1. Do not lift handset.
2. Press the Program softkey.
3. Press the DND softkey.
4. Press the Set softkey.
5. Choose the following softkey.
Ext Icm All
Cfwto Mon
6. Ext=Incoming Trunk Calls Blocked.
ICM=Incoming Intercom, Paging, call forwards and Transferred Trunk Calls Blocked.
ALL=All Calls Blocked.
Cfwto=Call Forwards Blocked.
Mon=Room Monitor blocked
7. To Cancel DND.
8. Do not lift handset.
9. Pressthe Program softkey.
10. Press the DND softkey.
11. Press the Cncl softkey.
Multiline Terminal Using Feature Key or Access Code
Multiline Terminal have a dedicated DND button for setting this feature. Steps to set up are same as
for programmed key below.
1. Do not lift the handset.
2. Press the DND feature key programmed in (PRG 15-07-01 or SC: 751: 03).
- OR -
Press DND key.
- OR -
Press Speaker key and dial 747.
3. Dial the DND option code.
0 = Cancel DND
1 = Incoming Trunk Calls Blocked
2 = Paging, incoming Intercom, Call Forwards and Transferred Trunk Calls Blocked
3 = All Calls Blocked
4 = Call Forwards Blocked
5 = Room Monitor Blocked
Features and Specifications Manual
Input Data
0 = Immediate
1 = Next call
0 = Off
1 = On
0 = Off
1 = On
SL2100
Default
COS 01 ~ 15 = 0
COS 01 ~ 15 = 1
COS 01 ~ 15 = 1
D
1-289