Flexible Ring - NEC SL2100 Features And Specifications Manual

SL2100
Description
Previously ring tones for incoming trunk calls are assigned to same tone at the extension. Extensions
have ability to assign individual ring tones for each trunk call. Beside system programming ring tones
can be assigned by accessing service code or Soft Key if available. Also each night mode can be
configurable to be confirmed by individual ring tones.
Ring tone can be assigned by accessing service code or Soft Key operation.
F
The data set manually is saved in Program 15-28-01.
Service Code
761 + Trunk number xxx + Night Mode 1 ~ 8
Soft Key
(This Feature is available for 2W Digital/IP Multiline Terminal)
Intercom ring tone can be set by Menu Soft Key + Dial 41.
Line keys ring tone can be set by Menu Soft Key + Dial 42.
Each line key and each night mode can be set by Menu Soft Key + Dial 43.
This night mode follows night mode group (Program 12-05) of the terminal.
Soft Key Menu
Ring Preferences Intercom (Menu 41)
Ring Preferences Line Keys (Menu 42)
Ring Preferences Each Line Keys
(Menu 43)
Conditions
• When the ring tone is changed at the terminal, the changed data is saved to Program 15-28-01.
When Program 15-28-01 is to "0", ring tone follows the setting of Program 15-02-02.
• During incoming call Soft Key can not be used to set ring tone.
• Delay ring follows the setting of DIL/IRG No Answer Destination (Program 22-08).
• This feature does not work for Recall, Transfer call, Virtual extension ring or ring no answer alarm
for Incoming call.
Default Settings
All trunks are in Ring Group 1. Extensions 101, 102, 103, 104, 105, 106, 107 and 108 (First 8 ports)
ring for trunk calls and all other extensions only flash.
1-308
Index 1
-
-
Line Key (001 - Trunk Max)

Flexible Ring

Index 2 Input Data
- Ring Type = 1 ~ 8
- Ring Type = 1 ~ 8
Night Mode (1 ~ 8) Ring Type = 1 ~ 8
Flexible Ring
ISSUE 1.0