NEC SL2100 Features And Specifications Manual page 789

ISSUE 1.0
• Toll Restriction
• Transfer
• Trunk Queuing and Camp-On
• Warning Tone for Long Conversation
• Voice Mail
• Voice Over
Data Communications
Refer to the individual features for additional descriptive, programming and operational information.
Guide to Feature Programming
Program Program Name
No.
10-03-01 HBIU Configuration - Terminal Type
10-03-03 HBIU Configuration - Transmit Gain Level for
SLT
10-03-04 HBIU Configuration - Receive Gain Level for SLT
10-03-05 HBIU Configuration - Select Port Type
10-09-01 DTMF, Dial Tone Detection Setup - DTMF, Dial
Tone Detection
15-03-01 Single Line Telephone Basic Data Setup - SLT
Signaling Type
15-03-03 Single Line Telephone Basic Data Setup - Termi-
nal Type
15-03-05 Single Line Telephone Basic Data Setup - Trunk
Polarity Reverse
15-03-06 Single Line Telephone Basic Data Setup - Exten-
sion Polarity Reverse
15-03-07 Single Line Telephone Basic Data Setup - Ena-
bled On-Hook When Holding (SLT)
15-03-08 Single Line Telephone Basic Data Setup - An-
swer On-Hook when Holding (SLT)
15-03-09 Single Line Telephone Basic Data Setup - Caller
ID Function
15-03-10 Single Line Telephone Basic Data Setup - Caller
Name
15-03-11 Single Line Telephone Basic Data Setup - Caller
ID Type
Features and Specifications Manual
Input Data
0 = No Setting
1 = Multi-Line Telephone
2 = SLT
8 = Door Phone
10 = DSS Console
3 ~ 7, 9, 11, 12 = Not Used
1 ~ 63 (- 15.5 ~ + 15.5 dB)
1 ~ 63 (- 15.5 ~ + 15.5 dB)
0 = Hybrid Port
1 = Door Phone
0 = Common use for both analog
extensions and trunks
1 = Use for analog extensions
(DTMF Receivers)
2 = Use for analog trunks (DTMF
receivers/Dial tone detection/
Caller ID detection)
0 = DP
1 = DTMF
0 = Normal
1 = Special
0 = Off
1 = On
0 = Disable (Off)
1 = Enable (On)
0 = No
1 = Yes
0 = Disable (No)
1 = Yes (Enable)
0 = Disable (Caller ID not dis-
played.)
1 = Enable (Caller ID is dis-
played.)
0 = Disable
1 = Enable
0 = FSK
1 = DTMF
SL2100
Default
32 (0dB)
32 (0dB)
0
Resource 01 ~ 140 = 0
Port1 ~ 112 = 1
(DTMF)
Port113 ~ 128 = 0 (DP)
Port1 ~ 112 = 0 (Nor-
mal) Port113 ~ 128 = 1
(Special)
0
0
1
1
0
1
0
1-775
S