NEC SL2100 Features And Specifications Manual page 627

ISSUE 1.0
To answer a Message Waiting (When VM Message Exist):
If there is a VM message and a Message Waiting set on the same extension and the user dials *0, it will
call the VM pilot because VM has a higher priority. To call back the message waiting caller before calling
VM you must do the following:
1. Press the Message Waiting key (PRG 15-07-01 or SC 751: 38).
- OR-
1. Press Help key + dial
2. Show the current MW status.
3. Change the status by the Up or Down Cursor key.
4. Press Speaker key.
To cancel all your Messages Waiting:
This includes messages you have left for other extensions and messages other extension have left for you.
1. At the Multiline Terminal, press Speaker key.
- OR-
At the Single Line Terminal, lift the handset.
2. Dial 773.
3. Hang up.
To cancel the Messages Waiting you have left at a specific extension:
1. At the Multiline Terminal, press Speaker key.
- OR-
At the Single Line Terminal, lift the handset.
2. Dial 771.
3. Dial the number of the extension you do not want to have your messages.
4. Hang up.
To check your messages:
1. Press Help key.
2. Dial 0.
*
You can have any combination of the message types in the following table on your telephone.
If you see. . .
VOICE MESSAGE
n MESSAGE
CHECK MESSAGE
VRS GENERAL MESSAGE
CHECK MESSAGE
(name)
3. Press VOL or to scroll through your display.
4. When you find the message you want to answer, press Speaker key. You either:
• Go to your Voice Mail mailbox.
• Listen to the new General Message.
• Automatically call the extension that left you a Message Waiting.
Features and Specifications Manual
0.
*
New messages in your Voice Mail mailbox.
A General message in Voice Mail that has not been heard.
Message Waiting requests left at your telephone by your co-workers.
You have. . .
SL2100
M
1-613