NEC SL2100 Features And Specifications Manual page 235

ISSUE 1.0
Related Features
Pulse to Tone Conversion
Guide to Feature Programming
Program Program Name
No.
15-03-03 Single Line Telephone Basic Data Setup - Termi-
nal Type
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
20-13-13 Class of Service Options (Supplementary Serv-
ice) - Continued Dialing (DTMF) Signal on ICM
Call
21-04-01 Toll Restriction Class for Extensions - Restric-
tion Class
21-05-04 Toll Restriction Class - Maximum Number of Dig-
its Table Assignment
21-06-03 Toll Restriction Table Data Setup - Maximum
Number of Digits Table Assignment
Operation
To use Continued Dialing:
1. Place an intercom or trunk call.
2. Continue dialing after the call connects.
Features and Specifications Manual
Input Data
0 = Normal
1 = Special
1 ~ 15
0 = Off
1 = On
1 ~ 15 = Toll Class 1 ~ 15
0 = No Table Applied
1 ~ 4 = Tables 1 ~ 4 ( Defined in
PRG 21-06-03)
SL2100
Default
0
Extension 101 is Class
15 and other Extension
are Class 1
COS 01 ~ 15 = 1
2
Class No1 ~ 2, 6 ~ 15 :
0
Class No3 : 1
Class No4 : 2
Class No5 : 3
Tables 1~4 = 30
1-221
C