NEC SL2100 Features And Specifications Manual page 167

ISSUE 1.0
Program Program Name
No.
14-01-22 Basic Trunk Data Setup - Caller ID to Voice Mail
14-01-24 Basic Trunk Data Setup - Trunk-to-Trunk Outgo-
ing Caller ID through Mode
20-02-08 System Options for Multiline Telephones - LCD
Display Holding Time
10-02-04 Location Setup - Area Code
10-02-05 Location Setup - Trunk Access Code
10-09-01 DTMF, Dial Tone Detection Setup - DTMF, Dial
Tone Detection
14-01-20 Basic Trunk Data Setup - Block Outgoing Caller
ID
14-01-21 Basic Trunk Data Setup - Caller ID Block Code
15-02-08 Multiline Telephone Basic Data Setup - Automat-
ic Handsfree
15-02-40 Multiline Telephone Basic Data Setup - Addition-
al Dial for Caller ID Call Return
15-02-57 Multiline Telephone Basic Data Setup - Caller
Log on busy
15-03-10 Single Line Telephone Basic Data Setup - Caller
Name
15-03-11 Single Line Telephone Basic Data Setup - Caller
ID Type
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
20-08-15 Class of Service Options (Outgoing Call Service)
- Block Outgoing Caller ID
20-09-04 Class of Service Options (Incoming Call Service)
- Notification for Incoming Call List Existence
20-13-06 Class of Service Options (Supplementary Serv-
ice) - Automatic Off-Hook Signaling (Automatic
Override)
20-19-01 System Options for Caller ID - Caller ID Display-
ing Format
20-19-05 System Options for Caller ID - Caller ID Sender
Queuing Time (Sender Wait)
20-20-01 Message Setup for Non-Caller ID Data - Private
Call
20-20-02 Message Setup for Non-Caller ID Data - Call from
Out of Service Area
20-20-03 Message Setup for Non-Caller ID Data - Call In-
formation with Error
Features and Specifications Manual
Input Data
0 = Disable (Caller ID not sent to
VM.)
1 = Enable (Caller ID is sent to
VM.)
0 = Disable (Caller ID not forwar-
ded out.)
1 = Enable (Caller ID is forwar-
ded out.)
0 ~ 64800 seconds
Dial (up to six digits) : 0 ~ 9,
*
#
Dial (up to eight digits) : 0 ~ 9,
, #
*
0 = Common use for both analog
extensions and trunks
1 = Use for analog extensions
(DTMF Receivers)
2 = Use for analog trunks (DTMF
receivers/Dial tone detection/
Caller ID detection)
0 = Prevent (No)
1 = Allow (Yes)
Dial (up to eight digits)
0 = Preselect
1 = One-Touch (Automatic
Handsfree)
Up to four digits (0, 1 ~ 9, #, )
*
0 = Off
1 = On
0 = Disable
1 = Enable
0 = FSK
1 = DTMF
1 ~ 15
0 = Off
1 = On
0 = Off
1 = On
0 = Off (manually)
1 = On (automatically)
0 = First 10 digits (Upper)
1 = Last 10 digits (Lower)
0 ~ 64800 seconds
24 Alphanumeric Characters
24 Alphanumeric Characters
24 Alphanumeric Characters
SL2100
Default
1
0
5
, No Setting
No Setting
Resource 01 ~ 140 = 0
0
1831
1
No Setting
0
1
0
Extension 101 is Class
15 and other Extension
are Class 1
COS 01 ~ 15 = 0
COS 01 ~ 15 = 0
COS 01 ~ 15 = 1
0
0
PRIVATE
OUT OF AREA
NO CALLER INFO
1-153
C