Table 1-3 Alarm Report Definitions; Table 1-4 Alarm Report Item Definitions - NEC SL2100 Features And Specifications Manual

SL2100
<< Alarm Report
LVL NO
MIN 0068
Alarm Report Heading
LVL
NO
STAT
DATE
TIME
A
ITEM
UNIT
SLT
PRT
PARAMETER
PKG Installation
ISDN Link
CPU LAN Link
Blocking
System Data Change
System Start Up
SMDR Link
STA
TRK
NET-DSP
Conditions
• Alarm reports can not be stored on SD card in SL2100.
• The supports the following Alarms to be output to the LCD of a Multiline Terminal:
- SMDR Buffer Full
- CPU-LAN link Error
• The SL2100 does not support printouts of the following Alarms:
- Power Failure
- RAM Backup Battery Error
- Networking Keep Alive Error
• Up to 12 System Alarm times can be scheduled to print on a Monthly, Daily, and Hourly time frame.
The report indicates both Major and Minor Alarms.
• When using the E-mail functionality of reports, the E-mail address in PRG 90-11-10 (From Address)
must be set for the E-mail feature to work.
1-28
STAT DATE TIME
ERR 01/22/09 09:40

Table 1-3 Alarm Report Definitions

Alarm Type (MAJ = Major, MIN = Minor)
Number of Alarm (4-digit)
Status (REC = Recovered, ERR = Error, WAR = Warning
Date the Alarm Occurred
Time the Alarm Occurred
Name of the Alarm
Name of the Board
Chassis Slot Number
Chassis Port Number
Related Information

Table 1-4 Alarm Report Item Definitions

Item Name
Board is removed or inserted.
ISDN Line failure is detected.
CPU LAN connection failure is detected.
Terminal Failure may have occurred because terminal blocking is detected. Termi-
nal is unplugged or wire is disconnected.
System Upgrade performed or Programming change.
System is reset.
Connection failure is detected between the CPU and SMDR printer device.
DSP for IP Station Call were all busy.
DSP for Trunk Call were all busy, includes SIP trunks.
SL Net Call when all DSP resource is busy.
05/16/2006 14:30 PAGE 001
ITEM UNIT
VoIP All DSP VoIPDB
Busy
Definitions
Definition
ISSUE 1.0
SLT PRT PARAMETER
01 00 NET
Alarm Reports