NEC SL2100 Features And Specifications Manual page 916

SL2100
• The feature works during play BGM or Room Monitor.
• If the WAV file number sets for both Caller-ID ring and Extension ring, the priority of Caller-ID ring is
higher than Extension Ring.
• The Voice channel will be released when the incoming ring has been stopped and stop to play the
WAV file.
• The WAV file is limited to play from a head of melody when receive an incoming call.
• For the occupied channel numbers for VRS incoming message is depending on the number of play
WAV file. Even though the three incoming calls have been received and two calls are used same
WAV file, in case the occupied channel number is two channels. The Ringing terminal numbers are
not related to the count of channels.
• The Ringing priority is as follows;
CID Incoming Voice/Melody Ring (PRG13-04-07) > CID Incoming Ring (PRG13-04-05) > Voice/
Melody ring for each extension (PRG15-02-55) > Normal Ring
V
• This feature can not be set from Navigation Key.
Default Settings
Disabled
System Availability
Terminals
Digital Multiline Terminal
Required Component(s)
None
Related Features
Caller ID
Guide to Feature Programming
Program
No.
13-04-01 Speed Dialing Number and Name - Number
13-04-02 Speed Dialing Number and Name - Name
1-902
Program Name Input Data
Maximum of 36 digits (0 ~ 9, ,
*
#, @, P, R)
@ = Wait for Answer Supervision
- ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
Maximum 12 Characters (Use di-
al pad to enter name)
Voice/Melody Ringing by VM
ISSUE 1.0
Default
No Setting
No Setting