NEC SL2100 Features And Specifications Manual page 351

ISSUE 1.0
Microphone Cutoff
Prime Line Selection
Guide to Feature Programming
Program Program Name
No.
15-02-08 Multiline Telephone Basic Data Setup - Automat-
ic Handsfree
15-02-16 Multiline Telephone Basic Data Setup - Hands-
free Operation
20-02-12 System Options for Multiline Telephones -
Forced Intercom Ring (ICM Call Type)
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
20-09-05 Class of Service Options (Incoming Call Service)
- Signal/Voice Call
Operation
To talk Handsfree:
1. Press Speaker, the Trunk Line, or the Virtual Extension key.
2. Place the call.
3. Speak toward the telephone when the called party answers.
To change a handset call into a Handsfree call:
1. Press Speaker key and hang up the handset.
2. Press Speaker key again to hang up.
To change a Handsfree call into a handset call:
1. Lift the handset.
To turn on/off Monitor:
1. Press Mute key or the Microphone Function key (PRG 15-07-01 or SC 751: 02) to turn on or off
the Microphone.
Monitor is off when Mute key LED is lit, the Microphone Function key is not lit (Off), or the handset
is lifted.
Features and Specifications Manual
Input Data
0 = Preselect
1 = One-Touch (Automatic
Handsfree)
0 = Disable (Off)
1 = Enable (On)
0 = Disable (Voice)
1 = Enable (Signal)
1 ~ 15
0 = Off
1 = On
SL2100
Default
1
1
1
Extension 101 is Class
15 and other Extension
are Class 1
COS 01 ~ 15 = 1
1-337
H