NEC UNIVERGE SV9300 Networking Manual page 235

CM Y No.
• When using the Paging Answer
12 67
20 0
20 0
Hardware Required
PGD(2)-U10 ADP/External Relay Interface on CPU
Paging equipment provided locally.
For cross connection of the Paging Equipment, refer to the System Hardware Manual.
Operating Procedure
To access paging equipment through CCIS:
1. Lift the handset and receive dial tone.
2. Dial the paging station number.
3. The connection to paging equipment is established.
1 ST DATA 2ND DATA
370 1/2
3 803
XX A071
NOTE 2
Assign the kind of paging to "Non-delay
answer" or "Non-delay and delay answer".
Assign the Access Code for Paging.
NOTE: This Access Code is used for Paging/
Paging Answer when providing the
Paging Answer with PGD(2)-U10
station number (CM08>157: 0).
Assign the Access Code for Paging Answer
(Paging Zone 1).
NOTE 1: Assign this data when not providing
the Paging Answer with PGD(2)-U10
station number (CM08>157: 1).
NOTE 2: Assign an arbitrary number for the
first data.
1-221
Chapter 1 CCIS FEATURES
PAGING ACCESS-CCIS
REMARKS
NWA-088654-001 Rev.1.0
94ch1006.fm