NEC UNIVERGE SV9300 Networking Manual page 184

A
CM90 If the Attendant Console is assigned as the des-
tination by CM51, assign a Call Forwarding-
Intercept (ICPT) key to the console.
Assign a Do Not Disturb function key to the
Multiline Terminal, if required.
Assign Do Not Disturb and Do Not Disturb
Override function keys to the DESKCON.
CM08 Specify whether or not to prioritize Station
Hunting over Do Not Disturb at receiving an
internal incoming call, when the Pilot station
of a Station Hunting group is set Do Not Dis-
turb./Specify whether to transfer to the destina-
tion of Call Forwarding-Busy Line or of Do
Not Disturb by CM51 Y=10, when the station
is set Do Not Disturb during setting Call For-
warding-Busy Line.
For a system with multiple-tenant, specify the
destination of a call transferred in CM51
Y=10.
CM48 Select the Dial Tone on setting Do Not Disturb.
END
DESCRIPTION
• Y=00
(1) My Line No. +
(2) F6065: Call Forwarding-Intercept Key
• Y=00
(1) My Line No. +
(2) F0022: Do Not Disturb set/reset
• Y=00
(1) DESKCON No. (E000-E007) +
No.
(2) F6102: Do Not Disturb
F6104: Reset
(1) 240
(2) 0 : To prioritize Station Hunting/To the
destination of Call Forwarding-Busy
Line
1 : To prioritize Do Not Disturb/To the
destination of Do Not Disturb by
CM51 Y=10
(1) 241
(2) 0 : Tenant of called station
1 : Tenant of calling station
• Y=2
(1) 14: Dial Tone on setting Do Not Disturb
(2) 0 : Special Dial Tone (Stutter Dial Tone)
1 : Dial Tone
1-170
Chapter 1 CCIS FEATURES
DO NOT DISTURB-CCIS
DATA
,
+ Key No.
,
+ Key No.
,
NWA-088654-001 Rev.1.0
94ch1005.fm
+ Key