NEC UNIVERGE SV9300 Networking Manual page 228

A
CM12 Assign the kind of paging to the PGD(2)-U10
station (CH2).
NOTE:
This data is valid when 2nd data: 1
(Paging) is assigned in CM12 Y=65.
Specify the Paging Zone to the PGD(2)-U10
station (CH2).
NOTE:
This data is valid when 2nd data: 1
(Paging) is assigned in CM12 Y=65.
CM20 Assign the access code for Paging Answer.
CM44 Assign the paging function to the PGD(2)-U10
ADP.
Associate the PGD(2)-U10 station number
with the Relay Group number.
CM13 Provide the connection with Dual port mode to
the PGD(2)-U10 ADP (CH2).
Set the port mode of the PGD(2)-U10 ADP
(CH2) to Dual port mode.
B
DESCRIPTION
BLADE RESET
BLADE RESET
• Y=67
(1) X-XXXXXXXX: Station No.
(2) 0 : Calling only (not using paging answer)
1 : Non-delay answer
2 : Non-delay and delay answer
3 : Ordinary station
• Y=68
(1) X-XXXXXXXX: Station No.
(2) 00-09
NONE : No data
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code
(2) A070-A079: For Paging Answer
• Y=00
(1) XX Y
XX: 00-31: Relay Group No.
Y : 0-3: Circuit No. of PGD(2)-U10 ADP
(2) 02XX: Speaker Paging Start
XX : 00-09: Speaker Paging Zone 0-9
• Y=01
(1) 00-31: Relay Group No.
(2) X-XXXXXXXX: PGD(2)-U10 Station No.
NONE
• Y=32
(1) X-XXXXXXXX: Station No.
(2) 0 : To connect
1 : Not connected
• Y=33
(1) X-XXXXXXXX: Station No.
(2) 0 : Dual port mode
1 : Single port mode
1-214
Chapter 1 CCIS FEATURES
PAGING ACCESS-CCIS
DATA
: Paging Zone No. assigned by
CM20 Y=0-3>A070-A079
(Zone 0-9)
: No data
NWA-088654-001 Rev.1.0
94ch1006.fm