NEC SV9300 User Manual

PHONE USER GUIDE -
nswering a Call
A
 Lift handset, press Line key if
necessary OR
 Press headset or speaker
button
Placing a Call on Hold
 While on a call, press Hold
 Line key will flash
Note: A held call will ring back
after 2 minutes
Retrieving a Held Call
 Press the Flashing Line Key
Redial
 Press Redial
 To scroll, press up or down
 To dial, lift the handset, press
speaker or press the # key
Transferring a Call
 While on a call, press Transfer
 Dial number or press a speed
dial
 Hang up to complete the
transfer
Conference Calls
 While on a call, press Transfer
 Dial number or press a speed
dial
 Wait for an answer, then
announce the conference call
 Press the Conf softkey and all
parties will be connected
Message Waiting Light
Located in the Top Center of the
phone, when you have a voicemail,
this will be lit up red
SoftKeys
The softkeys are the buttons located
directly below the LCD display, they
control Speed dial, voicemail
features, and conference
STA - allows access to station speed
dials
SYS - Gives option to access system
speed dials
HIST- Tracks outgoing and incoming
calls
Conf - While Connected with a call
press Conf to add a third party
to the call
SV9300
HardKeys
Lines 1 - 4 - As calls come in, they
ring on these lines
Voicemail - Provides Access to your
voicemail box
Page - Press to Page overhead
Page Pickup - If a call is ringing over
the paging unit, press Page pickup to
retrieve call
Group Speed Dial - Press this key
and enter the speed dial number
Ext Rollover - While Connected
with an internal call, a second
internal call or transfer will ring and
flash on this button
Ext_____- This is button is designated
for your extension
Feature- Used to activate phone
functions
Recall- Used to recall dial tone
Redial - List of last numbers dialed
Speaker-Used for hands free
conversation
Transfer- Allows the user to transfer
calls
Hold - Places the caller on hold