NEC UNIVERGE SV9300 Networking Manual page 190

Programming
START
CM29 Assign a Numbering Plan Group to each Ten-
ant.
CM20 Specify the number of digits for station num-
bers.
Example: For setting station number "2XXX"
(1) 2
(2) 804
NOTE:
CM05 Assign a Unit number and Slot number to the
LC/DLC blade.
CM10 Assign station number to the required Physical
Port number according to the Numbering Plan
specified by CM20.
END
Operating Procedure
No manual operation is required.
DESCRIPTION
Maximum of 6 digits station number
should be assigned when providing
PMS.
BLADE RESET
FLEXIBLE NUMBERING OF STATIONS-CCIS
(1) 00-63: Tenant No.
(2) 710-713 : Numbering Plan Group 0-3
NONE : Numbering Plan Group 0
• Y=0-3 Numbering Plan Group 0-3
(1) X: 1st digit of station No.
(2) 801: 1 digit
802: 2 digits
803: 3 digits
804: 4 digits
805: 5 digits
806: 6 digits
807: 7 digits
808: 8 digits
• Y=0
(1) XX ZZ
XX: 01-50: Unit No.
ZZ : 01-18: Slot No.
(2) 10: DLC blade
20: LC blade
• Y=00
(1) XX YY ZZ: Physical Port No.
XX: 01-50: Unit No.
YY: 01-18: Slot No.
ZZ : 01-32: Circuit No.
(2) X-XXXXXXXX: Station No.
1-176
Chapter 1 CCIS FEATURES
DATA
NWA-088654-001 Rev.1.0
94ch1005.fm