NEC UNIVERGE SV9300 Networking Manual page 144

Built-in SMDR Programming
For local office or tandem office, in addition to the programming of built-in SMDR, do the following pro-
gramming. For details of the built-in SMDR, refer to Station Message Detail Recording (SMDR) of Pro-
gramming Manual.
START
CM08 Do not provide the system with Centralized
Billing-CCIS for Center Office.
Provide the system with Centralized Billing-
CCIS for Local Office.
Specify whether the Office number is sent to
Center Office for Centralized Billing-CCIS.
NOTE:
Specify the Kind of Center Office for Central-
ized Billing-CCIS.
NOTE:
CMA7 Assign the data as follows.
1st Data
CCIS channel No.
(0-15) for
Center Office
See Example 2: Data Assignment of CMA7
Y=03, 04.
Assign Centralized Billing destination.
See Example 2: Data Assignment of CMA7
Y=03, 04.
A
DESCRIPTION
When the network adopts Open
Numbering Plan, set the office num-
ber by CMA7 Y=06.
This command is available in fol-
lowing conditions.
- Output Message Format of
SMDR: NEAX 2400 IMS Extended
Format.
- Local Office: SV8300/SV9300.
2nd Data
Page 1-135
Page 1-135
(1) 368
(2) 1 : Not provided
(1) 378
(2) 0: To provide
(1) 801
(2) 0 : To send
1 : Not sent
(1) 830
(2) 0 : SV8300/SV9300
1 : 2400 IPX
• Y=03
(1) 00-63: CCIS channel No.
0 (2) 0 : Distant end is Center Office
1 : Distant end is Local Office
3 : Not provided
• Y=04
(1) 00-63: CCIS channel No.
(2) 00001-16367: Point Code of Center Office.
1-130
Chapter 1 CCIS FEATURES
CENTRALIZED BILLING-CCIS
DATA
NWA-088654-001 Rev.1.0
94ch1004.fm