NEC UNIVERGE SV9300 Networking Manual page 226

C
CM44 Assign the paging function to the PGD(2)-U10
ADP.
Associate the PGD(2)-U10 station number
with the Relay Group number.
Assign Service Restriction Class A for Paging
CM12
Access to the required stations.
CM15 Allow Paging Access in Service Restriction
Class A assigned by CM12 Y=02.
Assign the forced release timer when the Pag-
CM41
ing Trunk is not released after seizing the
trunk.
NOTE:
If the 2nd data is set to 00, forced re-
lease is not performed.
END
DESCRIPTION
• Y=00
(1) XX Y
XX: 00-31: Relay Group No.
Y : 0-3: Circuit No. of PGD(2)-U10 ADP
(2) 02XX: Speaker Paging Start
XX : 00-09: Speaker Paging Zone 0-9
• Y=01
(1) 00-31: Relay Group No.
(2) X-XXXXXXXX: PGD(2)-U10 Station No.
NONE
• Y=02
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class A
• Y=08
(1) 00-15: Service Restriction Class A as-
signed by CM12 Y=02
(2) 1 : Allow
• Y=0
(1) 120
(2) 00-99: 0-396 seconds (4 second incre-
ments)
If no data is set, the default setting is 180 sec-
onds.
1-212
Chapter 1 CCIS FEATURES
PAGING ACCESS-CCIS
DATA
: No data
NWA-088654-001 Rev.1.0
94ch1006.fm