NEC UNIVERGE SV9300 Networking Manual page 114

CALL FORWARDING-NO ANSWER-CCIS / MULTIPLE CALL FORWARDING-NO ANSWER-CCIS
A
CM36 Allow the tandem connection to the incoming/
outgoing trunk route.
CM08 Allow Call Forwarding-Outside-CCIS.
Specify the Call Forwarding-No Answer-
Outside setting operation.
Specify the system operation when terminating
a DID call to station with Call Forwarding-No
Answer set to a busy destination station. (Des-
tination station has no call forwarding set.)
Assign whether an extension can set the desti-
nation of Call Forwarding-No Answer-Outside
by entering only a trunk access code.
CMA7 Allow or restrict Multiple Call Forwarding-All
Calls/Busy Line/No Answer-CCIS for each
CCH number.
CM42 Specify the number of times of Multiple Call
Forwarding-All Calls/Busy Line/No Answer-
CCIS.
B
DESCRIPTION
• Y=0
(1) XX ZZ
XX: 00-63: Incoming Trunk Route
ZZ : 00-63: Outgoing Trunk Route
(2) 0: Allow
(1) 370
(2) 1 : Allowed
(1) 222
(2) 0 : Setting when the station goes on-
hook/when receiving Service Set Tone
(PBR time out)
1 : Setting when receiving Service Set
Tone (PBR time out)
(1) 449
(2) 0 : Ring continuously at forwarded DID
station
1 : Drop to busy signal after time set by
CM41 Y=0>01
(1) 386
(2) 0 : Restricted
1 : Allowed
• Y=29
(1) 00-63: CCH No.
(2) 0 : Allowed (Maximum 7 times)
1 : Restricted (Only once)
(1) 72
(2) 01-07: 1 time-7 times
If no data is set, the default setting is 5
times.
1-100
Chapter 1 CCIS FEATURES
DATA
NWA-088654-001 Rev.1.0
94ch1003.fm