NEC UNIVERGE SV9300 Networking Manual page 225

B
CM12 Assign the kind of paging to the PGD(2)-U10
station (CH1).
NOTE:
This data is valid when 2nd data: 1
(Paging) is assigned in CM12 Y=65.
Specify the Paging Zone to the PGD(2)-U10
station (CH1).
NOTE: This data is valid when 2nd data: 1
(Paging) is assigned in CM12 Y=65.
CM08 Specify whether the SST is sent to a paging
station (PGD(2)-U10) when a speaker paging
is seized.
Specify whether to provide the Paging Answer
by PGD(2)-U10 Station Dialing (only in the
case of Delay and Non-delay answer).
NOTE: The Paging Answer by the following
methods is applied depending on the
setting of this command.
- When the second data is set to
"0": PGD(2)-U10 station number
assigned by CM10 Y=00.
- When the second data is set to
"1": Paging Zone 0-9 assigned by
CM20 Y=0-3: A070-A079.
CM20 Assign the access code for Paging Answer.
C
DESCRIPTION
• Y=67
(1) X-XXXXXXXX: Station No.
(2) 0 : Calling only (not using paging answer)
1 : Non-delay answer
2 : Non-delay and delay answer
3 : Ordinary station
• Y=68
(1) X-XXXXXXXX: Station No.
(2) 00-09
NONE : No data
(1) 732
(2) 0 : To send
1 : Not sent
(1) 157
(2) 0 : To provide
1 : Not provided
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code
(2) A070-A079: For Paging Answer
1-211
Chapter 1 CCIS FEATURES
PAGING ACCESS-CCIS
DATA
: Paging Zone No. assigned by
CM20 Y=0-3>A070-A079
(Zone 0-9)
NWA-088654-001 Rev.1.0
94ch1006.fm