NEC UNIVERGE SV9300 Networking Manual page 139

A
CM04 Specify the SMDR Message Format of billing
information for SMDR.
Provide the destination to send a billing infor-
mation which received from Local Office.
CM40 Set the interface conditions for built-in SMDR
to the CPU blade RS port.
NOTE: Only Unit01 can be assigned for
built-in SMDR.
To change the interface condition of each port
set by CM40 Y=00, assign the attribute data,
according to the SMDR terminal specifica-
tions.
B
DESCRIPTION
• Y=01
(1) 07
(2) 00 : Extended NEAX 2400 IMS Format
15 : Former NEAX 2400 IMS Format
(1) 06
(2) 1: RS port (To output to RS1/RS2 port set
• Y=00
(1) 0 (Unit01 Port 1)
1 (Unit01 Port 2)
(2) 14: Built-in SMDR
• Y=01 (Data Length)
(1) 0 (Unit01 Port 1)
1 (Unit01 Port 2)
(2) 0 : 7 bits
1 : 8 bits
• Y=02 (Parity Check)
(1) 0 (Unit01 Port 1)
1 (Unit01 Port 2)
(2) 0 : Effective
1 : Ineffective
• Y=03 (Kind of Parity)
(1) 0 (Unit01 Port 1)
1 (Unit01 Port 2)
(2) 0 : Odd Parity
1 : Even Parity
• Y=04 (Stop Bit)
(1) 0 (Unit01 Port 1)
1 (Unit01 Port 2)
(2) 0 : 1-Stop bit
1 : 2-Stop bit
• Y=05 (DTR Signal)
(1) 0 (Unit01 Port 1)
1 (Unit01 Port 2)
(2) 0 : Low
1 : High
1-125
Chapter 1 CCIS FEATURES
CENTRALIZED BILLING-CCIS
DATA
by CM40 Y=00>0)
NWA-088654-001 Rev.1.0
94ch1004.fm